How to fix the rain head

Prepare tools for repairing the rain head

1. Screwdriver

Purpose: Used to remove the Shower head fixing screws or screws on the handle.
Type: Prepare a screwdriver based on the type of screws, such as Phillips screws and flat-head screws.
2: Wrench
Usage: Used to tighten or loosen the connecting nut between the shower head and the water pipe, or adjust the fastener inside the shower head.
Type: Choose an adjustable wrench or a fixed wrench that fits the size of the shower head connection nut.
3. Pipe pliers
Use: Pipe pliers are a better choice when more force is required to tighten or loosen the connecting nut.
Note: Be careful when using pipe tongs to avoid damaging the shower head or pipe threads.
4. Toothbrush or needle
Usage: Used to clean the blockage in the shower head outlet hole, such as hair, scale and so on.
Alternative tools: If you do not have a toothbrush, you can also use a sharp object such as a fine needle or toothpick to clean up.

5. White vinegar or detergent

Usage: For soaking shower head to soften and remove scale. White vinegar is a natural descaler, or you can buy a special descaler.
Note: Follow the instructions on the descaler and ensure that the shower head is fully flushed to remove residue.
6. Adhesive or raw material tape
Purpose: To enhance the tightness and prevent water leakage when reinstalling the shower head.
Selection: Select the adhesive or raw material tape suitable for the water pipe material, and ensure its quality is reliable.
7. Replacement parts (if needed)
May include: O-ring, gasket, nozzle body, etc.
Note: When purchasing replacement parts, make sure that the dimensions, specifications and materials match the original parts.

Shower head repair preparation

security preparation

Turn off the water source: Before any repair work, always turn off the water source to the shower head to prevent flooding accidents.
Protective equipment: Prepare protective equipment such as rubber gloves if necessary to protect your hands from injury.
understand the shower head structure
Check the instruction manual or online resource: Before repairing, it is recommended to check the instruction manual or online resource of the shower head to understand the construction of the shower head and how to remove it. This will help you determine the problem more accurately and fix it more efficiently.
Other preparations
Clean the work area: Before repair, clean the work area to ensure that there is enough space for operation and to avoid clutter.
Prepare garbage bags or containers to collect disassembled old parts and garbage and keep the work area clean.

Shower head repair process

Remove shower head
Remove the fixing screws: Use a screwdriver to remove the screws from the shower head that are fixed to the water pipe or wall. Take care to save these screws so that they can be reinstalled after the repair is complete.
Detach the shower head: Detach the shower head from the water pipe or wall, taking care not to exert too much force to avoid damaging other components.
check and clean
Check for damaged parts: Carefully inspect the various parts of the shower head to find damaged or aging parts, such as O-rings, gaskets, nozzle bodies, etc.
Clean up scale: If the shower head water is not smooth, it may be due to scale blockage. At this point, you can use a toothbrush or a fine needle to clean the scale in the water hole, or use white vinegar to soak the shower head for a period of time (such as 3-4 hours) to soften and remove the scale.

Replace damaged parts
Purchase replacement parts: Purchase replacement parts based on the inspection results. Make sure the dimensions, specifications and materials of the replacement parts match those of the original parts.
Replacement parts: According to the structure and disassembly method of the shower head, replace the damaged parts with new parts. For example, if the O-ring is aged, it can be removed and replaced with a new O-ring.
Reinstall the shower head
Assemble the shower head: Reassemble the shower head with the replaced parts, making sure all parts are in place and secure.
Install the shower head: Install the shower head on the return pipe or wall and secure it with the screws removed earlier.
Test and adjustment
Turn on the water source: Turn on the water source where the shower head is located and check whether the shower head is leaking or not flowing well.
Adjust the direction: If the shower head can be adjusted, check that it is smooth and stable.
Clean up the site: clean up the garbage and debris generated during the repair process, and keep the work area clean and tidy.

Matters needing attention
Take care during the repair process to avoid damaging the shower head or other parts.
If you are not sure how to operate or encounter complex problems, it is recommended to seek the help of professional maintenance personnel.

When using adhesive or raw material tape, appropriate amount should be used, and ensure that the application is evenly, so as not to affect the sealing effect.
After the repair is complete, thoroughly test the shower head to see if it is back to normal operation.

we have aluminum faucets ，Wall-mounted shower，Basin Faucets，ect.